escutcheon for drainpipes

Escutcheon for drainpipes

  • For alteration with drilled holes
  • Fewer work stages
  • Is mounted on drainpipe
  • No need for repairing afterwards
  • Working from props and ladders is not required

A range of escutcheons for pipe- and sewerage lead-through connections in base plates and
walls. The ring-shaped escutcheon is slipped on pipe at mounting, alternative afterwards by
snapping the escutsheon at its snapping point, bending edges apart and pushing it over
the pipe.

The material is a semi-stiff obscured, overpaintable white polystyren. The escutcheon can be
glued, nailed, screwed or attached by casting. In narrow mountings can it be cut into
fitting shape.

Drilled holes, for example 150mm for sewerage systems, the escutcheon is used as a 
refinishing form for filling.

The escutcheon is held against the underside of the base plate with help of a conical fork that
is pushed over the pipe under the escutcheon.

The locking forks are made of plywood for sewerage diameter 110 and 75mm.
The forks can be reused.

: Påsklovsvägen 5
S-918 32 Sävar
Phone: +4690 - 980 01
Fax:  +4690-980 03
Org: 556425-2301

Environmental policy

  Share our site
Share our site through social media by using the links below.